• Outstanding mixing performance.
• Minimal pressure drop.
• Extremely equalization of temperature and velocity over the whole cross section.
• Optimized surface quality of produced products.
• Equal wall thickness of sheets and films.
• Saving of additives and Masterbatch.
• Excellent inline cleaning behaviour.
• Very fast color change without dismantling of mixer.
The Promix Melt Blender SMB plus is available with 3, 5 or 7 mixing elements depending on the required mixing degree. The new mixer design combines excellent mixing performance with low pressure drop and high strength. Due to the flow optimized mixer geometry the SMB plus mixer can be efficiently cleaned inline. Therefore color changes can be done fast without dismantling the mixer. However if dismantling is required, the open mixer structure allows easy inspection and cleaning. The Promix melt blender SMB plus is suitable for many applications including the production of films, sheets, profiles, pipes, blown films, coatings and foams.
The support ring of the melt blender SMB plus allows easy assembling and dismantling. The mixer can be supplied as a complete solution including a high quality housing, heater band and thermocouple.
Some videos related to:
Static Mixer Promix Solutions: Cleaning Performance .
Static Mixer Promix Solutions: High-low Viscosity Dispersing.
Static Mixer Promix Solutions: Working Principle .
Dimensions:This mixer type is available in the following flow channel diameters:
SMB-H is available in the following flow channel diameters:
It generally contains four mixing elements. For more demanding mixing tasks a six element execution is available. Most of these mixers are stock items and can be delivered at a short notice.
• Simple installation in existing systems.
• Highly viscous polymers can be processed due to the high strength of the mixer.
• Elimination of Flow lines.
• Improved processing of regrind Short delivery time.
The Promix Melt Blender SMB-R generally consists of 4 to 6 mixing elements, which homogenize the polymer melt in a radial direction. The degree of mixing is increased by a factor of 5 to 12.
Dimensions: This mixer type is available in the following flow channel diameters:
Most of these mixers are stock items and can be delivered at a short notice. Other sizes on request.
The Promix melt blender can be supplied as a complete assembly with housing, heating bands, thermocouples and is manufactured according to customer specification.
• Consistent melt quality.
• Temperature homogenization.
• Viscosity homogenization.
• Reduction of colorant.
• Short pay back period.
• Short delivery time.
Lower Pressure Drops
|• Excellent mixing||• Eliminates Flow lines|
|• Consistent melt quality||• Eliminates Non uniform shrinkage and warpage|
|• Eliminates color problems||• Short pay back time|
|• Reduction of color cost up to 20 %|
|• Injection molding (small machines)|
|• Homogenization with regard to temperature and concentration|
|• Compact, easy to install||• Cost-effective|
In one of the well known multinational companies, the payback periods were measured for an good industrial run of 6 months.
|• Application:||Pen Cap|
|• Mixer Used:||SMK-R 17/4.|
|• Masterbatch Percentage without static Mixer:||4%|
|• Masterbatch Percentage with Static Mixer:||3%|
|• Saving in Colorant:||25%|
|• Total Calculated Payback Period:||5 months|